Fisher & Paykel ActiveSmart RF135B Guide D'utilisation page 37

Masquer les pouces Voir aussi pour ActiveSmart RF135B:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cleaning and caring for your refrigerator
Humidity Control System
Important!
When cleaning the shelf above the vegetable bins,
we recommend that you do not disassemble the
Humidity Control System from the shelf.
In the event that the humidity control lid (plastic
lid) and humidity slides become separated from the
glass shelf, follow these instructions to reassemble.
Turn shelf upside down
1
To attach humidity slides onto
2
shelf front corners, fit bottom clips
into shelf front trim. Next, slide
sideways towards shelf until arm
clips onto glass.
To attach humidity control lid – with
3
text facing you, align lid with front
of shelf. Hold lid vertically and fit
front end into retainer on shelf.
Ensure lid fits into retainer as well as
underneath humidity slides.
At the sides of the shelf, adjust
4
humidity slide tabs so that the plastic
lid is between the shelf and the tabs.
If clips on back of shelf are present,
5
fasten lid with rear clips. Ensure that
the cover is fully secure at front and
back of shelf.
Retainer
Humidity Slides
Fig.31 Humidity Control System cleaning
US
35
CA

Publicité

Chapitres

Table des Matières
loading

Table des Matières