Faults - WIKA 32 Mode D'emploi

5. Commissioning, operation / 6. Faults
Design 3 (union nut), only with NS 200
straight

6. Faults

Personnel: Skilled personnel
Tools: Open-ended spanner for counter nut: SW 22
■
Open-ended spanner for immersion stem/thermowell:
■
SW 27 and SW 32
Allen key (for 90° version): size 3
■
CAUTION!
Physical injuries and damage to property and the
environment
If faults cannot be eliminated by means of the listed
measures, the instrument must be taken out of operation
immediately.
▶
Ensure that there is no longer any pressure present and
protect against being put into operation accidentally.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions
given in chapter 8.2 "Return".
WIKA operating instructions model 32
90° angle 135° angle
19
EN