Whiteness Compensation; Manual Operation; Self-Test Function; Performing A Reset - Renkforce 1488543 Notice D'emploi

l) Whiteness compensation
• Use the MENU button to select bALA in the menu and push the ENTER button.
• Select the colour share to be reconciled with the UP and DOWN buttons.
red Reconciliation of the red colour share
Gee Reconciliation of the green colour share
bLu Reconciliation of the blue colour share
• Push the ENTER button and select the desired colour intensity of the individual colours with the UP and DOWN
buttons. The intensity can be adjusted from 125 (dark) to 255 (light).
• Confirm the setting with ENTER.
This setting influences the colour temperature of the colour white.
m) Manual Operation
• Use the MENU button to select NAnu in the menu and push the ENTER button.
• Select the function to be set with the UP and DOWN buttons:
PAn PAN position
tILt TILT position
ZooN Zoom function
red Brightness red
Gee Brightness green
bLu Brightness blue
Uhi Brightness white
dINN Total brightness
Stro Speed of the strobe function
• Push the button ENTER and set the desired function with the buttons UP or DOWN.
• Confirm the setting with ENTER.
n) Self-test function
• Use the MENU button to select teSt in the menu and push the ENTER button.
• The device performs a self-test.
• Push the ENTER button to return to the normal operating mode.
The display teSt flashes during the self-test.
o) Performing a reset
• Use the MENU button to select rSet in the menu and push the ENTER button.
• The device performs a reset and then returns to normal operating mode.
During reset, the display indicates U402.
36