Pause Function; Display Deactivation; Setting The Display Alignment; Setting The Pan-Movement - Renkforce 1488543 Notice D'emploi

g) Pause function
• Use the MENU button to select bLNd in the menu and push the ENTER button.
• Select the desired operating mode with the UP and DOWN buttons.
no Pause function deactivated
YeS Pause function activated
• Press the ENTER button to confirm your selection.
h) Display deactivation
• Use the MENU button to select Led in the menu and push the ENTER button.
• Select the desired function with the UP and DOWN buttons.
oFF The display switches off after approx. one minute after the last button is pushed.
When the button is pushed again, the display will be activated again.
on Display permanently on
• Press the ENTER button to confirm your selection.
i) Setting the display alignment
• Use the MENU button to select dISP in the menu and use the ENTER button to select the desired display alignment:
dISP normal display alignment
dSIP inverted display alignment
If you want to operate the device suspended, the display alignment should be inverted.
j) Setting the PAN-movement
• Use the MENU button to select PInt in the menu and push the ENTER button.
• Select the desired direction of the PAN movement with the UP and DOWN buttons.
no PAN-movement not inverted
YeS PAN-movement inverted
• Press the ENTER button to confirm your selection.
k) Setting the TILT-movement
• Use the MENU button to select tInt in the menu and push the ENTER button.
• Select the desired direction of the TILT movement with the UP and DOWN buttons.
no TILT-movement not inverted
YeS TILT-movement inverted
• Press the ENTER button to confirm your selection.
35