Renkforce 1488543 Notice D'emploi page 31

Setting master-slave mode
• Use the MENU button to select SLNd in the menu and push the ENTER button.
• Select the desired DMX-operating mode with the UP and DOWN buttons.
NASt Master mode (automatic mode)
SL 1 Normal slave mode (The device acts synchronously to the master)
SL 2 Inverted slave mode (The device acts inverted to the master)
• Press the ENTER button to confirm your selection.
If the device is to be operated as a single device (standalone), it must be defined as a master device.
Only one device in a master-slave-chain must be defined as master device. All other devices must be
defined as slave devices.
The following tables provide information about the effects of the settings on the individual DMX channels.
10-channel DMX operation
DMX channel Value
1 000-255
2 000-255
3 000-255
4 000-255
5 000-255
6 000-255
7 000-255
8 000-255
9 000-007
008-015
016-131
132-139
140-181
182-189
190-231
232-239
240-247
248-255
10 000-179
180-189
190-199
200-209
210-255
Function
PAN-movement
TILT-movement
Zoom function
Brightness red
Brightness green
Brightness blue
Brightness white
Overall brightness
Lights off
Continuous light
Strobe slow > fast
Continuous light
Strobe with fade-in effect slow > fast
Continuous light
Strobe with fade-out effect slow > fast
Continuous light
Strobe with changing speeds
Continuous light
no function
Automatic mode
no function
Reset
no function
31