Bundle Software Installation Guide
7.
7.1.
Hardware Installation
1. Connect the male connector of RS232/USB* cable to the UPS communication port.
2. Connect the female connector of the RS232/USB* cable to a dedicated RS232 port
of the Computer.
3. For optional interface cards, please refer to Chapter 8 for more details.
*Note: Only RS232 cable is provided with the UPS. USB cable is optional
7.2.
Software Installation
Please refer to the user's manual of the bundled software CD_ROM for installation guide.
Optional Communication Cards
8.
8.1.
R2E (2
CN1 is for RS232 DB9.
For communication protocol, please refer to Chapter 3.4.1
Installation Position: Optional Slot.
8.2.
USE (2
CN1 is for USB.
Installation Position: Optional Slot
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
51
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 11 AA 68 203 03
nd
RS-232) card
nd
USB) card