INFOSEC UPS SYSTEM E6 LCD 1000 RT Manuel Utilisateur page 45

UPS Default Data and Special Function Execution
1. After UPS is turned on successfully, use
screen to drawing P1.
P1
2. Press key pad to scroll down the LCD screen, and then check the UPS settings.
The LCD display will show in sequence: Drawing P1 (buzzer)  Drawing Q1 (self-
test)  Drawing R1 (Bypass Voltage)  Drawing S (Output Frequency
Synchronized Window)  Drawing T (Inverter Output Voltage°  Drawing U1
(UPS Operation Mode)  Drawing V (Output Voltage Fine Tuning)
Q1
Q2
R1
R2
S
3. Press scroll up
include Buzzer ON (as drawing P1) or buzzer OFF (as drawing P2, Alarm silence for
UPS warning) and self-test ON (as Drawing Q1) or OFF (as Drawing Q2. UPS will
execute battery test for 10 seconds), if the self-test is successful, it show as
Drawing W; otherwise, it will show as Drawing D & error message at the same time.
W
INFOSEC UPS SYSTEM – 4 rue de la Rigotière – 44700 Orvault – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr – 06 11 AA 68 203 03
P2
key pad, you may execute special functions. The functions
key pad to change the LCD Display
T
U1
U2
U3
V
44