Table des Matières
Publicité
Applicable standards
• EN 50178 (1997)
• EN 60204-1 (1997)
• EN 60529: 1991
(IEC 60529)
• IEC 60664-1 (1992)
• EN 61800-3 (1996) +
Amendment A11 (2000)
• UL 508C
• CSA C22.2 No. 14-95
ACS/ACC 6x7 (75 to 3000 kW) Frequency Converters
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standards EN 50178 and EN 60204-1.
Electronic equipment for use in power installations
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is responsible for installing
- an emergency-stop device
Degrees of protection provided by enclosures (IP code)
Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
EMC product standard including specific test methods
UL Standard for Safety, Power Conversion Equipment, second edition
Industrial control equipment
Updates in Appendix A – Technical Data
Notice-13
Publicité
Table des Matières
