Sony STR-DA5400ES Mode D'emploi page 92

Making a zone 2 configuration using ZONE 2 VIDEO OUT (RJ45 jack)
ZONE 2 VIDEO OUT (RJ45 jack) is used only for custom installation by a qualified person.
ZONE 2 VIDEO OUT (RJ45 jack) is a jack that sends a source video signal to the component video
input for zone 2. For details, consult your dealer.
Note
This jack is not for an Ethernet LAN connection.
ZONE 2 VIDEO OUT (RJ45 jack) connection
The RJ45 pinouts use the T568B standard.
Refer to the illustration below.
ZONE 2 VIDEO OUT
(RJ45 jack)
Note
CAV-CVB1 (Component Video Balun) must be used. Other types will cause trouble and may void your
warranty.
RJ45 Video Pinout
The RJ45 pinouts use the T568B standard.
Refer to the illustration below.
92
GB
Component Video Balun
CAV-CVB1
CAT5 cable
Pinout
A Pin 1
B Pin 2
C Pin 3
D Pin 4
E Pin 5
F Pin 6
G Pin 7
H Pin 8
Component video
cable
Wire color
BLUE/Pb (R) White/Orange
BLUE/Pb (T) Orange
GREEN/Y (R) White/Green
GND Blue
+11V White/Blue
GREEN/Y (T) Green
RED/Pr (R) White/Brown
RED/Pr (T) Brown
Zone 2
TV
monitor