Sony STR-DA5400ES Mode D'emploi page 86

Notes
• The sound fields for movies do not work when the
multi-channel input is selected.
• The sound fields for movies do not work when
DTS-HD signals with a sampling frequency of
higher than 48 kHz are being received.
• The sound fields for movies do not work when
Dolby TrueHD signals with a sampling frequency
of higher than 96 kHz are being received.
• If you set up the sound field during DTS 96/24
signal reception, the signal will be played back
only at 48 kHz.
• If you set up the sound field effect while the
receiver is receiving signals with a sampling
frequency of higher than 48 kHz, the signals will
always be played back at either 44.1 kHz or
48 kHz.
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
Tips
• Sound fields with DCS marks use DCS
technology. See "Glossary" (page 143).
• When the sound field's DCS mark is selected,
the Digital Cinema Sound lamp lights up on the
display.
86
GB