Sony STR-DA5400ES Mode D'emploi page 14

Name Function
P Dolby
Lights up one of the
Digital respective indicators when
Surround the receiver is decoding the
indicators corresponding Dolby
Digital format signals.
;D Dolby Digital
;D+
Dolby Digital Plus
;D EX
Dolby Digital Surround EX
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "Analog."
Q DTS-HD
Light up when the receiver
indicators is decoding DTS-HD.
DTS-HD Lights up constantly with
the one of the following
indicators.
MSTR DTS-HD Master Audio
LBR DTS-HD Low Bit Rate
Audio
HI RES DTS-HD High Resolution
Audio
R ;TrueHD
Lights up when the receiver
is decoding Dolby TrueHD.
S L-PCM
Lights up when Linear
PCM (Pulse Code
Modulation) signals are
input.
14
GB
Name Function
T Dolby
Lights up one of the
Pro Logic respective indictors when
indicators the receiver applies Dolby
Pro Logic processing to 2
channel signals in order to
output the center and
surround channel signals.
;PL Dolby Pro Logic
;PLII
Dolby Pro Logic II
;PLIIx
Dolby Pro Logic IIx
Note
This indicator does not light
when either the center speaker
and surround speaker is not
connected.
U DTS(-ES)
Light up when DTS or
indicators DTS-ES signals are input.
DTS Lights up when the receiver
is decoding DTS signals.
Either 96/24 or NEO:6 also
lights up depending on the
input signal format or
decoding format.
96/24 DTS 96/24 (96 kHz/24 bit)
decoding
NEO:6 DTS Neo:6 Cinema/Music
DTS-ES Lights up with the either
following indicator
depending on the input
signal decoding format.
DISCRETE DTS-ES Discrete 6.1
MATRIX DTS-ES Matrix 6.1
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
"Analog."
V Neural-THX Lights up when the receiver
applies Neural-THX
processing to input signals.