Sony STR-DA5400ES Mode D'emploi page 20

Name Function
ed RETURN/
Press to return to the previous
EXIT O
menu or exit the menu while the
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
ef CATEGORY
Press to select the category for
+/– satellite tuner.
(U.S.A./
Canadian
model only)
B·/·b
Press to select an album.
eg DISC SKIP Press to skip a disc when using
a multi-disc changer.
eh MASTER
Press to adjust the volume level
VOL +/–
of all speakers at the same time.
TV VOL +/–
Press TV (wf), then press TV
VOL +/– to adjust the volume
level of the TV.
ej MUTING Press to turn off the sound
temporarily. Press the button
again to restore the sound.
ek BD/DVD/
Press to display the menus of
TOP MENU, the DVD player on the TV
screen. Then use V/v/B/b and
MENU
operations.
MACRO1, Press AMP (4), then press
MACRO2 MACRO 1 or MACRO 2 to set
up the macro function
(page 139).
a)
See the table on page 133 for information on the
buttons that you can use to control each
component.
b)
The tactile dot is attached to these buttons (TV/5,
N, PRESET +/TV CH +). Use as a mark of
operation.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
20
GB
to perform a menu
Zone 2/Zone 3 remote
commander (RM-AAP027)
This remote is for zone 2/zone 3 operations
(page 89).