Duct Cover Extension (Optional) - Thermador Masterpiece Serie Instructions D'installation

Duct Cover Extension (optional)

On some models, optional duct covers and telescoping
extensions may be used to fill the space between the hood
and ceiling in wall mount installations. Chimney duct cover
included with the range hood fill the space between the
hood and ceiling of 8' (2.4 m) ceilings. Telescoping exten-
sions accommodate 12' (3.6 m) ceilings.
Model
HMWB30WS
HMWB361WS
Telescopic Duct Cover Installation
IMPORTANT: Secure the Chimney Hood to the wall after
installing the Extension Mounting Bracket, but before
installing the Telescoping Chimney Extension.
Securing the Telescoping Chimney Extension Bracket
1. Ensure that the minimum height of 30" (762 mm) from
the bottom of the hood to the cooking surface will be
maintained.
2. Locate two studs at the mounting location.
10 10 13 13
(275) (275)
34" 20 ⁄ "
9
16
(863) (522)
34" 20 ⁄ "
9
16
(860) (522)
English | 18 |
Telescopic
Extension
CHXTHMCB
CHXTHMCB
⁄ ⁄ " "
16 16
13 13 ⁄ ⁄ " "
2 2
16 16
(332) (332)
DUCTED DUCTED
MIN: 32 MIN: 34" (860) 1 ⁄ " (814)
16
MAX: 53 MAX: 63" (1600) / " (1355)
3
8
RECIRCULATING RECIRCULATING
MIN: 32 MIN: 39" (99) ⁄ " (814)
1
16
MAX: 57 MAX: 77" (1700) 5 ⁄ " (1455)
16
20 5"
(127) (522)
3. Mount the duct cover bracket on the top of the ceiling
using (2) 1½'' (38 mm) screws (provided). Ensure that the
bracket is level.
4. Insert the complete duct cover at an angle and swivel
toward the wall.
⁄ "
9
16
Installation Instructions