Important; Hot Surfaces - Medion MD 15501 Mode D'emploi

 Only allow the microwave oven and mains cable to be
repaired by a professional workshop or contact the Medion
Service Centre in order to avoid risks.

IMPORTANT

Risk of damage!
Risk of damage to the device if installed incorrectly.
 The microwave oven is designed as a free-standing device
and must not be built into kitchen units.
 Make sure that the mains cable is not damaged and does
not run underneath the device or over hot surfaces or sharp
edges.
 Place the microwave oven on a level, stable surface which is
able to carry the weight of the device as well as the maximum
weight of the food which will be cooked in it.
 The microwave oven must be installed in a safe, dry
environment.
 Protect the microwave oven from water in droplet and spray
form. If the microwave oven does come into contact with
water, pull out the plug from the mains socket immediately.
 Do not place the microwave oven near heat sources.

4.3. Hot surfaces

DANGER!
Risk of explosion!
Mixtures of water and oil can ignite or even explode.
 Do not heat water mixed with oil or fat in the
microwave oven.
DE
FR
NL
EN
157 of 167