Additional Safety Rules; Environmental Protection - Ryobi EPN-6082 Traduction Des Instructions Originales

Safety, performance, and dependability have been given
top priority in the design of your planer.
INTENDED USE
The product is only intended for planing wood (removing
an even layer to provide a smooth, fl at fi nish) and rebating
wood.
The product is not intended to be used for stationary
planing.
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
PLANER SAFETY WARNINGS
■ Wait for the cutter to stop before setting the tool
down. An exposed rotating cutter may engage the
surface, leading to possible loss of control and serious
injury.
■ Hold the tool by insulated gripping surfaces only,
because the cutter may contact its own cord. Cutting
a "live" wire may make the exposed metal parts of the
tool "live" and could give the operator an electric shock.
■ Use clamps or other practical ways to secure and
support the workpiece to a stable platform. Holding
the work by hand or against the body leaves it unstable
and may lead to loss of control.

ADDITIONAL SAFETY RULES

■ The dust produced when using this tool may be harmful
to health. Do not inhale the dust. Use a dust absorption
system and wear a suitable dust protection mask.
Remove deposited dust thoroughly, e.g., with a vacuum
cleaner.
■ Do not remove splinters or saw dust while tool is
running.
■ Only plane with sharp blades, avoid metals (nails,
screws). Check the workpiece before planing.
■ Do not reach into the danger area of the tool when
plugged in.
■ Place the front plate of the machine on to the workpiece
and switch on, before the planer blade touches the
workpiece and then guide evenly over the workpiece.
■ The v-shape notch in the front of the supporting plate
ensures safe chamfering of edges.
KNOW YOUR PRODUCT
See page 55.
1. Lock-off button
2. Dust flow direction mark
3. Dust flow direction knob
4. Dust bag
5. Dust bag adaptor
6. Depth adjustment knob
7. Depth scale
8. Live tool indicator
9. Power cable
10. Dust outlet
11. Side fence knob
12. Side fence
MAINTENANCE
■ If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
■ The tool should never be connected to a power supply
when you are assembling parts, making adjustments,
cleaning, performing maintenance, or when the tool is
not in use. Disconnecting the tool will prevent accidental
starting that could cause serious injury.
■ When servicing use only identical RYOBI replacement
parts. Use of any other parts may create a hazard or
cause product damage.
■ Replace worn blades with new ones.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
■ Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils come in contact with
plastic parts. They contain chemicals that can damage,
weaken or destroy plastic.
■ Electric tools used on fiberglass material, wallboard,
spackling compounds, or plaster are subject to
accelerated wear and possible premature failure
because the fiberglass chips and grindings are highly
abrasive to bearings, brushes, commutators, etc.
Consequently, we do not recommend using this tool for
extended work on these types of materials. However, if
you do work with any of these materials, it is extremely
important to clean the tool using compressed air.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SYMBOLS ON THE PRODUCT
Safety alert
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
1