Charging Batteries - Midland CARDO BT Rider FM Guide D'utilisation

Detailed view of the BT Rider FM
Main unit
Buttons
The buttons on the communication units lets you enable Bluetooth
connection and telephone functions They can be activated in two
different modes:
• Short pressure: push the button less than one second
• Longer pressure: push the button for more than 3 seconds
center CTRL button
Volume -
Charging socket
Fixing plate with microphone and speaker

Charging batteries

Make sure that both units are fully charged prior to initial use. Allow at
side Function key
least 4-5 hours for a full charge before using for the fi rst time. Normally
for call reject, call
3-4 hours will suffi ce for complete charge.
termination, redial or
Charge the unit by inserting the wall-charger into the charging socket
radio button
(lift the rubber cover to insert the plug).
Volume +
•
•
2
Microphone
back-plate of the clamp (press on
arc to release the headset unit)
Sliding-plate of the clamp
The red LED on the BT Rider FM will turn on when charging begins.
Allow the headset to charge until the red LED turns off.
When the charge is complete, release the headset from the
charger.
Earphones