Battery Removal - Remington Endurance Groomer MB4200 Mode D'emploi

Masquer les pouces Voir aussi pour Endurance Groomer MB4200:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
ENGLISH
TIPS FOR BEST RESULTS
Avoid using lotions before use.
If you are trimming for the first time start with the maximum comb length setting.
CARE FOR YOUR GROOMER
To ensure long lasting performance of the groomer, clean after each use.
The easiest and most hygienic way to clean the appliance is by rinsing the appliance
head under the tap after use while the blades are running.
To keep the unit in optimal condition we recommend re-oiling the blades after cleaning.
Place a few drops of cutter or sewing machine oil onto the blades. Wipe off excess oil.

BATTERY REMOVAL

The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the mains supply when removing the
battery.
Ensure the trimmer is discharged of all power.
Remove the comb attachment.
Use a flat screwdriver to pry apart the top and bottom housing.
Remove the circuit board from the housing.
Disconnect the battery from the circuit board.
The battery is to be disposed of safely.
RECYCLING
W
6
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable
batteries marked with one of these symbols must not be disposed of
with unsorted municipal waste. Always dispose of electrical and
electronic products and, where applicable, rechargeable and
non-rechargeable batteries, at an appropriate official recycling/
collection point.

Publicité

Table des Matières
loading

Table des Matières