Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
To deactivate turbo and go to the normal speed setting, press the On/Off switch down
for 2 seconds.
•
Always comb your beard or moustache with a fine comb before you start trimming.
ADJUSTABLE COMB
•
Attach the adjustable comb by placing the comb above the groomer so that the back of
the adjustable comb sits above the detail blade. Slide the comb down onto the groomer
body so that the comb rails slot into the recesses found either side of the groomer body
until it clicks into place.
•
To remove the comb make sure the comb is set at the minimum length setting. Grasp
the comb and pull firmly upwards and away from groomer, whilst pushing upwards with
your other thumb.
•
Select the comb length by pressing the comb length adjustment button and pushing
upwards to increase the length setting or downwards to decrease the length on the
adjustable comb. The length setting can be seen on the length position indicator on the
back of the comb.
TO THIN AND TAPER THE BEARD/MOUSTACHE
•
If you are trimming for the first time start with the maximum trimming length setting.
•
Turn the unit on.
•
Place the flat top of the adjustable comb against the skin.
•
Slowly slide the trimmer through the hair. Repeat from different directions as necessary.
•
If hair builds up in the trimmer comb during the trimming process, switch the unit off,
pull off the comb and brush the hair off.
CLOSER TRIMMING AND DETAIL BLADE TRIMMING
•
For stubble lengths, remove the adjustable comb and follow the
instructions noted above.
•
Using the main blade without the adjustable comb will trim hair to 1mm. Holding the
main blade perpendicular to the skin will trim hair to 0.4mm.
•
To achieve a shaven look ensure the hair is already trimmed down to 1mm. Then using
the detail blade slowly rest the blades against the skin to trim down to 0.2mm.
•
Note: The detail blade sits directly behind the front of the product. This has been
designed to pull the skin taught in order to effectively trim hairs down to the 0.2mm
length.
TRIMMING EDGE OF SIDEBURNS
•
Hold the trimmer with the main blade facing you with the adjustable comb removed.
•
Start with edge of sideburn and with the trimmer blades resting lightly against your
skin, use motions towards edge of sideburn line to trim the desired locations in facial
area.
•
Shape as desired.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
5
Publicité
Table des Matières
