Battery Removal - Remington BHT6255 Mode D'emploi

Masquer les pouces Voir aussi pour BHT6255:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
ENGLISH
, STORAGE
Store this appliance and cord in a moisture free area. Do not store it in
temperatures exceeding 140°F (60°C).
Do not wrap the cord of the charging adaptor around the appliance.

BATTERY REMOVAL

The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing
the battery.
Remove the attachment head.
Using a small, flat screwdriver, pry off 2 springs from the top side.
Move/push 2 release buttons to the centre.
Push/pry the inner housing from the outer housing and expose the PCB and
battery.
Pry the PCB assembly out of the inner housing.
Cut or break the wire stamps on both ends of the battery and remove the
battery.
The battery is to be disposed of safely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with
this symbol must not be disposed of with unsorted municipal waste,
but recovered, reused or recycled.
6

Publicité

Table des Matières
loading

Table des Matières