Customer Service - Klein Tools VDV500-051 Manuel D'instructions

Masquer les pouces Voir aussi pour VDV500-051:

Manuel d'instructions (17 pages)

Table des Matières

Les langues disponibles

ENGLISH

Remove screw at the speaker end on the rear of the PROBEplus with

a #1 Phillips head screwdriver. Remove battery door.

Recycle exhausted battery.

Acquire a 9 volt alkaline battery (IEC 6LR61, ANSI/NEDA 1640A).

Connect battery cable to new battery observing polarity and place

into battery compartment.

Replace battery door and screw, taking care not to over-tighten it.

This product is warranted to be free from defects in materials and

workmanship for a period of two years from the date of purchase. During

this warranty period, Klein Tools has the option to repair or replace or refund

the purchase price of any unit which fails to conform to this warranty under

normal use and service. This warranty does not cover damage which occurs

in shipment or failure which results from alteration, tampering, accident,

misuse, abuse, neglect, or improper maintenance. Batteries and damage

resulting from failed batteries are not covered by w\ warranty. A purchase

receipt or other proof of original purchase date will be required before

warranty repairs will be rendered.

Any implied warranties, including but not limited to implied warranties

of merchantability and fitness for a particular purpose, are limited to the

express warranty. Klein Tools shall not be liable for loss of use of the

instrument or other incidental or consequential damages, expenses, or

economic loss, or for any claim or claims for such damage, expenses

or economic loss.

Some states or countries laws vary, so the above limitations or exclusions

may not apply to you. This warranty gives you specific legal rights, and you

may also have other rights which vary from state to state. If your Klein product

requires repair or for information on how to exercise your rights under the

terms of this warranty, please contact Klein Tools at 1-800-553-4676.

Turn instrument off and disconnect test leads. Clean the instrument by

using a damp cloth. Do not use abrasive cleaners or solvents.

Remove the batteries when instrument is not in use for a prolonged period

of time. Do not expose to high temperatures or humidity. After a period

of storage in extreme conditions exceeding the limits mentioned in the

Specifications section, allow the instrument to return to normal operating

conditions before using it.

Caution:

accessories shall be subject to a separate collection and

correct disposal.

KLEIN TOOLS, INC.

PROBEplus BATTERY REPLACEMENT

DISPOSAL / RECYCLE

This symbol indicates that equipment and its