Customer Service - Klein Tools VDV500-820 Manuel D'instructions

BATTERY REPLACEMENT
When the Low Battery Indicator
1. Turn off instrument(s) before attempting to replace batteries.
2. Loosen screw ,
T16 P16
3. Remove and properly dispose of four 1.5V AAA batteries.
4. Install new batteries (note proper polarity).
5. Replace battery cover and fasten securely with screw.
To avoid risk of electric shock, do not operate while battery door is removed.
PROBE-PRO TIP REPLACEMENT (KLEIN CAT. NO. VDV999-068)
The tip of the Probe-Pro is replaceable if damaged. To remove and replace tip:
P1
1. Turn tip 1/4 turn and pull gently to remove.
2. Insert new tip with key in proper orientation and push gently.
3. Rotate 1/4 turn to lock into place.
Be sure instrument is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive
cleaners or solvents.
Remove the batteries when instrument is not in use for a prolonged period of time. Do not expose to high
temperatures or humidity. After a period of storage in extreme conditions exceeding the limits mentioned in the
GENERAL SPECIFICATIONS section, allow the equipment to return to normal operating conditions before using.
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance
with local regulations. Please see www.epa.gov/recycle for additional information.
MAINTENANCE
or blinks, the batteries must be replaced.
T11 P8
on battery cover ,
T15 P15
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
Lincolnshire, IL 60069
customerservice@kleintools.com
www.kleintools.com
.
CLEANING
STORAGE
WARRANTY
450 Bond Street
800-553-4676
7