Installation; Door Opening - IKEA STJARNSTATUS Mode D'emploi

EN
Tools Necessary:
Phillips Head
or
Quadrex Head
Screwdriver
Components Provided:
Top Hinge
Cover Front
Screw
Top
Hinge
Screw
This Use & Care Guide provides general
installation and operating instructions
for your model. We recommend
using a service or kitchen contracting
professional to install your refrigerator.
Use the refrigerator only as instructed in
this Use & Care Guide. Before starting
the refrigerator, follow these
important first steps.
Location
• Choose a place that is near a
grounded, non-GFCI, electrical
outlet. Do Not use an extension
cord or an adapter plug.
• If possible, place the refrigerator
out of direct sunlight and away from
the range, dishwasher, or other heat
sources.
• The refrigerator must be installed
on a floor that is level and strong
enough to support a fully loaded
refrigerator.
• Consider water supply availability for
models equipped with an automatic
ice maker.
(OR)
AND
6mm
Allen Wrench
Top Hinge
Cover Rear
Screw
Lower
Hinge
Screw

INSTALLATION

AND
⅜" and ¼"
Socket
Wrench
CAUTION
D
o Not install the refrigerator where
the temperature will drop below 55°F
(13°C) or rise above 110°F (43°C).
The compressor will not be able to
maintain proper temperatures inside
the refrigerator.
Do Not block the toe grille on the lower
front of your refrigerator. Sufficient air
circulation is essential for the proper
operation of your refrigerator.
Installation
Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
Sides & Top ⅜ inch (9.5 mm)
Back
Note
I
f your refrigerator is placed with the
door hinge side against a wall, you
may have to allow additional space so
the door can be opened wider.

Door opening

Your refrigerator should be positioned
to allow easy access to a counter
when removing food. For best use of
refrigerator drawers and freezer baskets,
the refrigerator should be in a position
where both can be fully opened.
OR
OR
Adjustable ⅜" Fixed
Wrench
1 inch (25.4 mm)
Wrench
7