IKEA STJARNSTATUS Mode D'emploi page 13

EN
Removing Freezer Drawer
CAUTION
Drawer is heavy. Use caution when
lifting.
1 Remove 4 hex head drawer screws.
2 Lift up drawer to remove.
Remove
Hex Head
Drawer Screw
Replacing Freezer Drawer
1 Extend the Freezer slides from the
unit.
2 Carefully align support pin with
hooks on end of freezer slides and
then lower freezer door onto slides.
3 Replace the 4 hex head screws that
secure the slides to the door (2 on
each side) and tighten.
DO NOT
Remove
Other
Screws
To locate the pin, look inside the
drawer and the pin is next to the door
liner and the slides. Not all parts are
shown in the illustration.
DOOR REMOVAL
Pin
Hook
Note
DO NOT
Loosen
or
Remove
These 3
Hex
Screws
13