DeVilbiss Healthcare PULSEDOSE COMPACT PD1000 Guide De L'utilisateur page 6

OPERATING INSTRUCTIONS
Inserting A battery Into The PulseDose Compact Conserving Device
1
NOTE– When changing
batteries, first turn the rotary
selector to the "OFF" position.
Attaching Your PulseDose Conserving Device To The Cylinder
1
Loosen the knob.
CAUTION– Alignment pins can damage sealing surfaces of the post increasing the chance of leakage. Align
the pins in the conserving device to the alignment holes in the cylinder post.
Using Your PulseDose Compact Conserving Device
1
Open the cylinder.
EN - 6
2
Open the battery door. Insert 2
"AA" Alkaline or NiMH
batteries (observe polarity).
2
Carefully lower the conserving
device over the post of the
cylinder.
2
Attach the standard nasal
cannula to the cannula fitting
and to your nose and face.
Oxygen tubing up to 35 feet
long may be used in
PulseDose delivery mode.
3
Close the battery door.
3
Hand-tighten the knob until the
conserving device is secure.
3
Turn "ON" by turning the
rotary selector to the
prescribed flow setting. Always
confirm that the green and red
lights flash at startup.
A-1000