Siemens SIMOGEAR Getriebe 2030 Instructions De Montage Et De Mise En Service page 233

Table des Matières

Publicité

SIEMENS
Original Einbauerklärung / EU-Konformitätserklärung
Declaration of incorporation / EU-declaration of conformity
Verordnung (EU) Nr. 2019/1781*:
Verordnung der Kommission vom 1. Oktober
2019 zur Festlegung von Ökodesign-
Anforderungen an Elektromotoren und
Drehzahlregelungen gemäß der Richtlinie
2009/125/EG des Europäischen Parlaments
und des Rates; Amtsblatt der EU
L272, 25/10/2019, S. 74–94
Weitere Angaben über die Einhaltung dieser
Richtlinie(n) enthalten Anhang MR1 und MR2, die
integraler Bestandteil dieser Erklärung sind.
* - Die Verordnung (EU) Nr. 2019/1781 wird nur für die
Produkte erklärt, welche in den Anwendungsbereich fallen.
Erfasst sind Motoren, die gemäß den Angaben auf dem
jeweiligen Typenschild für den Betrieb mit einer Frequenz von
50Hz, 60Hz, 50/60Hz, mit einer Nennspannung UN von mehr
als 50 V und bis zu 1000 V sowie einer Nennausgangsleistung
PN von 0,12 kW bis einschließlich 1000 kW in der Betriebsart
Dauerbetrieb ausgelegt sind sowie zwei, vier, sechs oder acht
Pole aufweisen und nicht vollständig geschlossen
selbstgekühlt (TENV) sind.
Diese Erklärung bescheinigt die Übereinstimmung mit den genannten
Richtlinien, ist jedoch keine Beschaffenheits- oder Haltbarkeitsgarantie.
Die Sicherheitshinweise der mitgelieferten Produktdokumentation sind zu
beachten.
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Jim Hagemann Snabe; Vorstand: Roland Busch, Vorsitzender; Cedrik Neike, Matthias
Rebellius, Ralf P. Thomas, Judith Wiese; Sitz der Gesellschaft: Berlin und München, Deutschland; Registergericht: Berlin-Charlottenburg, HRB 12300,
München, HRB 6684; WEEE-Reg.-Nr. DE 23691322
Nr. / No.A5E51443210AA
Regulation (EU) No. 2019/1781*:
Commission Regulation of 1 October 2019 laying
down ecodesign requirements for electric motors
and variable speed drives pursuant to Directive
2009/125/EC of the European Parliament and of
the Council; Official Journal of the EU L272,
25/10/2019, p. 74–94
Further information about the conformity to this
Directive(s) is given in Annex MR1 and MR2 which are
integral parts of this declaration.
* - Regulation (EU) No. 2019/1781 is declared only for the products
that fall within the scope. Covered are motors that, according to the
information on the respective nameplate, are designed to operate at
a frequency of 50Hz, 60Hz, 50/60Hz, with a nominal voltage UN of
more than 50 V and up to 1000 V and a nominal output power PN of
0.12 kW up to and including 1000 kW in the continuous operation
mode and have two, four, six or eight poles and are not totally
enclosed non-ventilated (TENV).
This declaration is an attestation of conformity with the indicated
Directive(s) but does not imply any guarantee of quality or durability.
The safety instructions of the accompanying product documentation
shall be observed.
2 / 8
DE / EN

Publicité

Table des Matières
loading

Table des Matières