Table des Matières
Publicité
SIEMENS
Product identification:
The following essential health and safety requirements of Directive 2006/42/EG, Annex I are relevant for the
identified uncompleted machinery. According to the remarks in column 3 they have been solved respectively
bear residual hazards which have to be covered by the manufacturer of the final machinery. Risks, not being
relevant for the uncompleted machinery are not listed.
2006/42/EC
Denotation
Annex I
1
Essential health and safety requirements
1.1.2
Principles of safety integration
1.1.3
Materials and products
1.1.5
Design of machinery to facilitate its handling
1.3
Protection against mechanical hazards
1.3.1
Risk of loss of stability
1.3.2
Risk of break-up during operation
1.3.3
Risks due to falling or ejected objects
1.3.4
Risks due to surfaces, edges or angles
1.3.8.1
Moving transmission parts
1.4
Required characteristics of guards and protective
devices
1.4.1
General requirements
1.4.2
Special requirements for guards
1.4.2.1
Fixed guards
1.5
Risks due to other hazards
1.5.1
Electricity supply
1.5.2
Static electricity
1.5.4
Errors of fitting
1.5.5
Extreme temperatures
1.5.6
Fire
1.5.8
Noise
1.5.9
Vibrations
1.5.13
Emissions of hazardous materials and substances
Diese Erklärung bescheinigt die Übereinstimmung mit den genannten
Richtlinien, ist jedoch keine Beschaffenheits- oder Haltbarkeitsgarantie.
Die Sicherheitshinweise der mitgelieferten Produktdokumentation sind zu
beachten.
Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Jim Hagemann Snabe; Vorstand: Roland Busch, Vorsitzender; Cedrik Neike, Matthias
Rebellius, Ralf P. Thomas, Judith Wiese; Sitz der Gesellschaft: Berlin und München, Deutschland; Registergericht: Berlin-Charlottenburg, HRB 12300,
München, HRB 6684; WEEE-Reg.-Nr. DE 23691322
to the declaration of incorporation
No. A5E36964102AL
Geared motor 2KJ3 ..
Annex MR2
This declaration is an attestation of conformity with the indicated
Directive(s) but does not imply any guarantee of quality or durability.
The safety instructions of the accompanying product documentation
shall be observed.
7 / 8
Requirement fulfilled
y/n
Additional remark
y
y
y
y
y
y
y
y
y
y
y
y
Fulfillment of safety
objectives of Directive
2014/35/EC
y
y
y
y
y
y
y
EN
Publicité
Table des Matières
