Description; Overview; Introduction; Intended Use - GreenWorks Pro CSB401 Manuel D'utilisation

EN
1

DESCRIPTION

1.1

OVERVIEW

Figure 1-22
43
2
1
10
8
9
40
41
42
12
Guide bar cover
1
Front handle
2
guard / chain brake
Front handle
3
Lock out button
4
Trigger
5
On/off switch
6
Oil indicator
7
Spike bumpers
8
Saw chain
9
10 Guide bar
2

INTRODUCTION

Your product has been engineered and manufactured to
high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you
years of rugged, trouble-free performance.
2.1

INTENDED USE

This chainsaw is designed for cutting branches, trunks,
logs and beams of a diameter determined by the cutting
length of the guide bar. It is only designed to cut wood.
It is only to be used in an outdoor, domestic application
by adults.
Do not use the chainsaw for any purpose not listed
above.
6
11
3
18
4
5
12
7
15
15
13
14
11 Oil tank cap
12 Rear handle
13 Chain tension
screw
14 Chain cover
15 Chain cover nuts
40 Battery
41 Charger
42 Charger cable
43 Wrench
English
This chainsaw is not to be used for professional tree
services. It is not to be used by children or by persons
not wearing adequate personal protective equipment
and clothing.
2.2

RESIDUAL RISKS

Even with the intended use of the power tool, there is
other risk which cannot be prevented.
According to the type and construction of the power
tool, the following potential hazards might happen:
• Contact with exposed saw teeth of the saw chain
(cutting hazards).
• Access to the rotating saw chain (cutting hazards).
• Unforeseen, abrupt movement of the guide bar
(cutting hazards).
• Flung out parts from the saw chain (cutting /
injection hazards).
• Flung out parts of the work piece.
• Inhalation of work piece particles.
• Skin contact with the lubricating oil.
• Loss of hearing, if no ear protection is used during
work.
3 GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all instructions.
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
battery-operated (cordless) power tool.
3.1

WORK AREA SAFETY

• Keep work area clean and well lit.
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool.
control.
3.2

ELECTRICAL SAFETY

• Do not expose power tools to rain or wet
Water entering a power tool will increase
conditions.
the risk of electric shock.
4
WARNING
Cluttered or dark
Power tools create sparks
Distractions can cause you to lose
Failure to