Technical Data; Limited Warranty - GreenWorks Pro CSB401 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
Possible cause
The motor runs,
The machine is
but the chain
in the protection
does not cut cor-
mode to protect
rectly, or the mo-
the PCB.
tor stops after
around 3 sec-
onds.
The battery is
not charged.
The chain is not
lubricated.
Incorrect battery
storage tempera-
ture
16

TECHNICAL DATA

Voltage
No load speed
Guide bar length
Chain pitch
Chain gauge
Drive links
Chain oil capacity
Weight (without battery
pack)
Chain
Guide bar
17

LIMITED WARRANTY

YEAR/ANS
TOOL WARRANTY
GARANTIE DE
L'OUTIL
English
Solution
Release the trig-
ger and start the
machine again.
Do not force the
machine to cut.
Charge the bat-
tery. Refer to the
battery and
charger manual
for correct charg-
ing procedures.
Lubricate the
chain to de-
crease the fric-
tion. Do not let
the guide bar
and the chain
operate without
sufficient lubri-
cant.
Cool the battery
pack until it de-
creases to the
ambient temper-
ature.
80 V DC
34.5 ft/s (10.5 m/s)
18'' (458 mm)
3/8" (9.5 mm)
0.05" (1.1 mm)
62
6 oz (180 ml)
11lbs (5 kg)
91P062X
180SDEA041
®
Greenworks
hereby warranties this product, to the
original purchaser with proof of purchase, for a period of
four (4) years against defects in materials, parts or
workmanship. Greenworks
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline, at 1-855-345-3934.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Greenworks
15
®
, at its own discretion will
®
.
EN

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

2000002

Table des Matières