Technical Data; Noise/Vibration Information; English - Milwaukee M18 SMS216 Notice Originale

TECHNICAL DATA

Mitresaw
Production code
No-load speed
Saw blade dia. x hole dia
Battery voltage
Saw blade thickness
Max. cutting width
Mitre 0°/ Bevel 0°
Mitre 45°/ Bevel 0°
Mitre 0°/ Bevel 45°
Mitre 45°/ Bevel 45°
Min. workpiece dimensions
Weight according EPTA-Procedure 01/2003

Noise/Vibration Information

Measured values determined according to EN 61029. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
GB
Total vibration values (vector sum in the three axes) determined according to EN 61029.
Vibration emission value a
Sawing of wood
Uncertainty K
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 61029 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications, with
di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is running but
not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, re and/
or serious injury.
Save all warnings and instructions for future reference.
MITRESAW SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Wear gloves!
Before using the tool please read the instructions. If possible have the
tool demonstrated.
Ensure that the machine is always stable and secure (e.g. xed to a
bench).
Keep the oor area free of loose material e.g. chips and cut-o s.
Do not use saw blades which are damaged or deformed

English

22
h
Do not use saw blades not corresponding to the key data given in
these instructions for use.
Only use tools that meet standard EN 847-1.
Do not use saw blades made of high-speed steel.
It is necessary to select a saw blade which is suitable for the material
being cut.
It is essential to adhere to the maximum speed speci ed on the saw
blade.
Transport and store the tools in a suitable receptacle;
Do not use any anges other than those supplied or indicated in the
instruction manual to secure the saw blade.
Never use the mitre saw to cut materials other than those speci ed in
the instruction manual.
Only use the saw with guards in good working order and properly
maintained, and in position.
Refrain from removing any cut-o s or other parts of the workpiece
from the cutting area whilst the machine is running and the saw
head is not in the rest position.
Never reach into the danger area of the machine when it is running.
M18 SMS216
4467 81 01...
... 000001-999999
2700 min
-1
216 x 30 mm
18 V
1,5 mm
60 x 270 mm
60 x 190 mm
48 x 270 mm
48 x 190 mm
130 x 35 x 2 mm
14,5 kg
88 dB (A)
101 dB (A)
1,9 m/s
2
1,5 m/s
2