Abus MODUVIS TVHS20 Serie Mode D'emploi page 99

Masquer les pouces Voir aussi pour MODUVIS TVHS20 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Subnet mask
Gateway
Note
When you press the switch for the DHCP function, the switch first jumps to the
right and then to the left again.
At this moment an IP address is obtained from the DHCP server, which is then
set as a fixed IP address in the device.
4)
Select the type of monitor you wish to configure.
Indoor station Type
Floor
Apartment no.
Indoor station:
The monitor acts as the main monitor for a home's door intercom system. It can be set up in
a single-family or multi-family home. The main monitor in a residence must always be set up
with the type "indoor station". If you only use one call button and one residence, the
apartment number will remain on "1". If multiple residences/main monitors are used, the
apartment numbers must be changed.
Example:
Residence 1 => apartment number 1
Residence 2 => apartment number 2
(etc...)
This is the only way the call buttons can be assigned to different parties.
Note:
A main monitor (indoor station) must always be linked to the main door station in the
system.
Interior extension:
The monitor is used as an extension monitor in a system to equip more rooms in a home. All
extension monitors are linked to the main monitor and display the same functions as the
main monitor when the call button is pressed.
You can link up to a maximum of 5 additional monitors to a main monitors. (No. 1-5). You
can also assign each monitor a "room name". The room names will automatically appear
under "Contacts" on the other monitors in the system.
Wizard assistant 3/4
Indoor station
97
255.255.255.0
192.168.0.1
0
1

Publicité

Table des Matières
loading

Table des Matières