Abus MODUVIS TVHS20 Serie Mode D'emploi page 121

Setting the network parameters of the video door module
Door Station Settings
192.168.0.26
255.255.255.0
192.168.0.1
DHCP
Microphone volume
Ring tone volume
Talk volume
Cancle
Lines 1 -3:
DHCP:
The received IP address data are then set as fixed data. There is no further automatic query of
Microphone volume:
Ring tone volume:
Call volume:
Performing a reset to the factory settings of the video door module
All settings of the video door module can be reset here via the main monitor.
Reset all settings to default?
Cancle
70%
70%
70%
OK
IP address, gateway and subnet mask
When the button is pressed, the request for the IP address data from
the DHCP server is started. The switch then goes back to the left.
the data.
Setting the sensitivity of the microphone in the video door module
Setting the volume of the ring tone after pressing the bell button on the
video door module
Setting the volume during a call on the video door module
OK
119