Floor Buttons - Abus MODUVIS TVHS20 Serie Mode D'emploi

5.2.3

Floor buttons

On/Off
The floor button is connected directly to the monitor via the wired inputs and creates a direct door
bell on the front door. This function is primarily used in multi-family homes. The main-door station
is at the bottom of the main entrance here. Each home has a direct door bell button on the front
door, however. The ring tone for the floor button is different from the normal ring tone of the
video door module.
Button/display
Line 1 – Line 8
NO / NC
Further information can be found in the Installation and operating information section in chapter
9.7 Connecting floor call buttons
"
Floor bell
Description
Describes which input on the monitor is used
for the floor button. Input 1 (line 1) is used as
standard.
Normally Open / Normally Closed.
determines whether the call button on the front
door is an open or closed contact. Typically it
is a "NO" contact switch.
to the main monitor".
112
This