Password Settings (Pin Code) - Abus MODUVIS TVHS20 Serie Mode D'emploi

5.2.11

Password settings (PIN CODE)

PIN assignment for keypad TVHS20030
Pin code
Note: You will need the keypad for PIN CODE entry TVHS20030 for this.
You can set a 6-digit key here that will then be used to open the doors via keypad. The PIN code
is always 6 digits.
Please press the following combination to enter the PIN on the keypad:
Up to firmware V2.0.8 / V2.1.2 build 200410:
"#" 6-digit PIN "#". Example: # 123456 #
From firmware V2.2.3 / V2.1.2 build 201029:
"#" Apartment number 6-digit PIN "#". Example: # 1123456 #
- i.e. from this firmware the PIN can be set individually for each apartment.
- It is now possible to change and delete apartment-dependent PINs
Locally on the monitor, one PIN CODE can be assigned.
using remote configuration with the ABUS CMS software. This means that a total of up to 4 PIN
codes are possible. To add a code via ABUS CMS software, open remote configuration for the
door video module and select the menu item "Intercom" and "Permission password". The PIN
codes are generally saved in the video module and not in the keypad.
Password settings
123
Three more codes can be entered