Floor Installation; Flown Installation - dB Technologies INGENIA IG3T Caractéristiques Techniques

English

FLOOR INSTALLATION

It is possible a floor installation of 1 or 2 INGENIA IG3Ts using the accessory GSA-
IG. A mechanical fixing with screws or screw anchors suited to the type of flooring
is required.

FLOWN INSTALLATION

Flown configuration provides for the hanging of 1 or 2 IG3T speakers, where the
optional accessory DRK-IG allows the use of a shackle, and the combination of
DRK-IG with the optional truss adapter TA-IG allows fixing on a specific device,
such as a rig. When the speakers are in a flown configuration, it is very advisable to
use both power supply and signal linking, to reduce the complexity of connections,
as shown in the "FIRST SWITCH-ON" section.
ATTENTION!
• When used outdoors, anchor the speaker to prevent any
oscillations due to atmospheric agents and wind.
• Never use the handles to suspend the speaker!
INGENIA IG3T Cod. 420120239 REV. 1.1
65