Usage Examples; Floor-Standing Stage Monitor; Usage As Monitor For Longer Distances; Usage On Tripod Stand - dB Technologies LVX XM12 Mode D'emploi

3. USAGE EXAMPLES

• In the monitor configuration, plan installation so as to ensure appropriate
sound coverage, with as few obstacles as possible, and such to avoid the
Larsen effect (audio feedback).

FLOOR-STANDING STAGE MONITOR

. Usage as stage audio monitor is quick and easy. Determine floor slope (if any) to
ensure that the monitor will not slide. Check for obstacles in front of the speaker.
Consider the dispersion pattern shown in section SOUND COVERAGE.

USAGE AS MONITOR FOR LONGER DISTANCES

The monitor has suitable feet that allow it to be placed with the amplifier heat-
sink side facing down as shown in the figure. This way, the speaker can be used as
a monitor with greater front coverage on the stage. This particular arrangement
can cause the heat sink to become very hot (hot surface).
WARNING!
• The heat sink of the LVX XM speaker can become very hot. Before
placing the speaker in this mounting configuration, ensure that the
surface it is to be placed on is made from material resistant to high
temperatures and not propagating flame.

USAGE ON TRIPOD STAND

A pole mount socket with 35-mm diameter is provided to mount the monitor on
a tripod stand. Ensure that the tripod centre leg is pointing forward to improve
stability. Maximum mounting height (height of monitor's bottom side above floor)
is 1.4 m.
WARNING!
• In outdoor applications, consider anchoring the speaker to
prevent swinging due to weather or wind.
• Use a suitably sized stand with the central leg pointing forward
to provide appropriate stability.
• Never hand the speaker from the handles.
• The only configurations allowed are those shown in this manual
LVX XM12
32
English
Cod. 420120240 REV.1.0