Connecting The Outputs Of Multiple Modules (Audio Daisy Chain) - dB Technologies LVX XM12 Mode D'emploi

English
LVX XM12 can supply mains power to another monitor up to a maximum current draw of 14 A (3200 W)
when operating at 220-240Vac or up to 11 A (1200 W) when operating at 100-120Vac. To perform this type of
connection, simply connect the supplied power supply cable to the MAINS INPUT (8) of the first LVX XM12 module
and connect a second (optional) cable with suitable connectors across the MAINS LINK output (9) and the MAINS
INPUT (8) of the next LVX XM12 module in the chain. Several modules can be connected in this manner up to the
maximum current draw allowed that is indicated on the MAINS LINK connector (9) of the first monitor.
WARNING!
The maximum current draw allowed indicated in the rating data of LVX XM12 (MAINS LINK) is calculated
based on the maximum current specification of the PowerCON connector. However, this is not a fixed
value as it depends on the type of cable (cross-section area and type of plug) used to connect the first
LVX XM12 module and on the next LINK cables (cross-section area and type of cable) in the chain. Always
check the maximum current (and power) specifications and the cross-section areas of the cable leads used
when designing and sizing the sound system, and anyway before connecting several modules in a daisy-
chain connection.

CONNECTING THE OUTPUTS OF MULTIPLE MODULES (audio daisy chain)

DAISY CHAIN
To connect 2 or more speakers to the same audio source in certain installations, you may find it convenient
to daisy chain the signal from a first module to the next and so on. First, connect an audio source
to "INPUT" (4) of the first speaker (for the different "LINE" or "MIC" connection,
please read section INPUT
balanced XLR cable across the "LINK" output (5) of the first speaker and the "INPUT" (4) of the next speaker.
Repeat this second step to connect additional speakers until achieving the installation that best suits the
specific application.
LVX XM12
CONNECTIONS). Next, connect a
AUDIO INPUT
Cod. 420120240 REV.1.0
31