Connections; Connecting And Linking The Audio Signal - dB Technologies IS Série Manuel D'utilisation

English

2. CONNECTIONS

CONNECTING AND LINKING THE AUDIO SIGNAL

The audio input and link to another speaker are connected via Euroblock (Phoenix) connectors; the connectors
are protected under a metal panel that is easily removed by unscrewing the four screws securing it to the cabinet.
Connect the audio source (e.g., from an amplifier or another speaker) to the INPUT terminal, respecting the
polarity markings next to the connectors (positive to positive, negative to negative). The audio signal can be
linked to another speaker in a similar way: connect the LINK output of the speaker to the INPUT terminal of the
next speaker respecting the polarity (positive to positive, negative to negative).
AUDIO SOURCE SORGENTE SPEAKER PARALLEL
AUDIO PARALLELO SPEAKER
IS4T-IS5T-IS6T
Cod. 420120373 REV. 1.0
16