System Coverage Menu - dB Technologies INGENIA IG3T Caractéristiques Techniques

SYSTEM COVERAGE MENU

For information about the functions contained in this menu, only
displayed if during SYSTEM CHECK the system has automatically
detected 2 speakers, also refer to paragraph
"INSTALLATION EXAMPLES" section. This menu allows to modify the beam
of the emitted wave and the relevant acoustic coverage when the system
has detected 2 speakers properly installed in a stacked configuration and
properly recognised by the DSP, on the basis of pre-sets already stored that
can be selected and then confirmed:
• UP +10° for an installation requiring an acoustic coverage from
the bottom up, with mounting on stand or subwoofer and with as
much inclination as possible.
• UP +5° to orientate the wavefront with a medium upward
inclination, with mounting on stand or subwoofer
• UP +2.5° to get an acoustic coverage with a slight upward
inclination.
• FAR 0° when you want a coverage getting as far as possible,
when speakers are installed in front of the auditorium, at the height
of the audience.
• DOWN -2.5° to be used to orientate the acoustic coverage
slightly downward (for example with the public not very far from the
speakers and flown installation).
• DOWN -5° for a directivity with a medium downward inclination
(for example with public close to the speakers and flown
installation).
• DOWN -10° to incline the acoustic coverage as downward as
possible (public very close to the speakers and flown installation).
INGENIA IG3T
60
"DIGITAL STEERING" in the
English
System Coverage Menu
Cod. 420120239 REV. 1.1