System Coverage Menu - dB Technologies Ingenia IG1T Caractéristiques Techniques

SYSTEM COVERAGE MENU

For information about the functions contained in this menu, only displayed
if during SYSTEM CHECK the system has automatically detected 2 speakers,
also refer to paragraph "DIGITAL
EXAMPLES" section. This menu allows to change the emitted wave beam
and the relevant acoustic coverage, once the DSP has recognized the
installation of 2 IG1T speakers:
• UP +10° for an installation requiring an acoustic coverage from
the bottom up, with mounting on stand or subwoofer and with as
much inclination as possible.
• UP +5° to orientate the wavefront with a medium upward
inclination, with mounting on stand or subwoofer
• UP +2.5° to get an acoustic coverage with a slight upward
inclination.
• FAR 0° when you want a coverage getting as far as possible,
when speakers are installed in front of the auditorium, at the height
of the audience.
• DOWN -2.5° to be used to orientate the acoustic coverage
slightly downward (for example with the public not very far from the
speakers and flown installation).
• DOWN -5° for a directivity with a medium downward inclination
(for example with public close to the speakers and flown
installation).
• DOWN -10° to incline the acoustic coverage as downward as
possible (public very close to the speakers and flown installation).
INGENIA IG1T
60
STEERING" in the "INSTALLATION
English
System Coverage Menu
Cod. 420120237 REV. 1.1