Points For Attention; Security; Maintenance; Operation - Baxtran BOC-P Manuel D'utilisation

3. POINTS FOR ATTENTION

3.1 SECURITY

The user must use the right way to access and use the power supply. Check whether the connection is in good condition. You must unplug the
power before replacing the fuse.

3.2 MAINTENANCE

• Gently move the scale to avoid falling or collision.
• Clean the scale with a dry or wet cloth. Do not use water to clean, to avoid damage; Do not use organic solvents to avoid scaling deformation
or paint peeling.
No matter whether the scale is powered on or off, do not place items or apply external forces that exceed the maximum weighing capacity of the
scale in order to protect the loadcell.

3.3.OPERATION

• When using alternating current, check whether the AC light is on. If the light is not on, further check the power supply to see if it is plugged
in correctly or if the fuse has burned out. If necessary, open the battery cover and disconnect the battery to determine whether the light is
damaged.
• Handle it gently and weigh it accurately.
• Press keys with finger, or other key operation. Do not damage the keyboard by using a pencil, ball pen, or hard nib.
• Electronic scale is a high-precision measuring instrument; Not suitable in high humidity, high temperature, strong magnetic field, dust or
vibration serious situation to use.
• Users can bring their own devices for comparison. It is better to compare with the electronic scale before use every day. If there is any doubt
about the scale, it should be stopped immediately and sent to the metrological testing institution or the authorized maintenance center for
inspection.
• When using the scale, if Lb is displayed in the ''WEIGHT WINDOW' ( ) it means that the scale battery can only be used for a short time
and it is time to charge the scale.
12
BOC-P USER MANUAL EN EN