Main Technical Parameters; Power Consumption; Relative Humidity; Preparation Before Use - Baxtran BOC-P Manuel D'utilisation

EN
Dear Users,
The BOC-P Scales, are high performance products, developed and produced by our company, according to "Electronic Digital Platform Scale"
standards. It has the characteristics of rapid and accurate measurement, stable and reliable performance, simple and convenient to use. In
order to effectively help you to use our company's products correctly, please install and use the scale according to the instructions, which will
help your operation and extend the service life of the scale.

1. MAIN TECHNICAL PARAMETERS

2. PREPARATION BEFORE USE

7. Please charge the new scale for approx. 10 hours before using it. The 'WEIGHT WINDOW' ( ) will display the battery power, or you can
check the battery power when turning on the scale.
8. Please put the weighing scale on a flat place when using, and use four scale feet, let the scale keeping balance (do not put the scale on
moving or shaky place). Please take care that the bubble is in the middle.
9. Avoid placing the scale in a place where the temperature varies greatly or the air flows violently. For example: places with direct sunlight or
the outlet of air conditioner.
10. Avoid interference of other electronic products.
11. When power on, please do not put anything on the scale plate.
12. Power on 15-20 minutes before using, to ensure the accuracy of weighing.
1.Power Supply

2.Power Consumption

3.Working Temperature
4.Storage Temperature

5. Relative Humidity

6.Range of Zero Setting
7.Tare Range
AC - 220V (+10%/-15%) 50Hz
3W
-10ºC to 40ºC
-20ºC to 50ºC
≤70%R.H for storage, ≤85%R.H for
operation
Less than or equal to 3% maximum capacity
The tare value is the maximum capacity
(tare value + net weight = maximum
weight).
BOC-P USER MANUAL EN EN
11