Install Cooking Appliance; Appliance Installation/Operation - Zephyr DLI-E30ASX Mode D'emploi

Install Cooking Appliance

1. Align the cooking appliance with downdraft and fasten appliance
in place following appliance instructions.
Control Panel and Up Button
Fan + Button
• Press to increase fan speed.
• After maximum speed is reached, press + button once more to
turn fan off.
Fan - Button
• Press to decrease fan speed.
• After minimum speed is reached, press - button once more to
turn fan off.
2 Level Light Control
• Press once for dim level.
• Press 2x for bright level.
• Press 3x to turn light off.
Increase Fan Speed
Decrease Fan Speed
2 Level Light Control
30-Hour Filter Clean Reminder

Appliance Installation/Operation

Note: Accurate alignment of cooking appliance and downdraft is
necessary to ensure that there is no interference when air vent is
raised and lowered. There should be a gap of 1/32 " - 1/16 " between
the back of the cooktop and the front of the downdraft cover.
30-Hour Filter Clean Reminder
• After 30 hours of blower "ON" time, filter clean icon will blink
continuously.
• To reset, touch and hold icon for 2 or more seconds. Indicator
will turn off.
Up/Down Button
• To retract chimney, touch down button. Any feature that is
active will shut off.
• Touch up button on right trim to raise chimney. All functions will
return to their previous settings.
Fan +
Up/Down Button
Fan -
Light
Filters
19