Sony PDBK-201 Guide D'installation Et D'operation page 8

TX modulator
RX receiver
i.LINK converter
a) DVB-ASI
b) Microwave link
c) i.LINK
8
Additional Function Menu Settings
PDW-700/F800
+
HDCA-702
a)
b)
a)
c)
PDW-HD1500/F1600
(with this board installed)
Additional Function Menu
Settings
When this board is installed in the PDW-HD1500/F1600,
the underlined settings in the following tables appear in the
function menu.
Refer to Chapter 3 "Preparations" in the PDW-HD1500/
F1600 Operation Manual for more information about
function menu operations.
P1 VIDEO page
Item Setting
F1: V INPUT Selects the video input signal.
HDSDI: HDSDI signal
i.LINK: i.LINK signal
SDSDI: SDSDI signal
SG: Test signal from internal signal
generator (Normally this item is not
displayed. It appears when you hold the
button down for 3 seconds.)
Note
When "i.LINK" is selected, HDSDI output and SDSDI
output in the PDW-HD1500/F1600's E-E mode is not
guaranteed.
P2 AUDIO page
Item Setting
F1: A1 INPUT Selects the audio input signal to assign to
audio channel 1.
SDI: Audio signal embedded into SDI signal
ANALOG1: Analog 1 audio signal
AES/EBU: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
i.LINK: i.LINK signal
SG: Test signal from internal signal
generator (Normally this item is not
displayed. It appears when you hold the
button down for 3 seconds. The test
signal is assigned to audio channels 1
to 8 simultaneously.)
F2: A2 INPUT Selects the audio input signal to assign to
audio channel 2.
SDI: Audio signal embedded into SDI signal
ANALOG2: Analog 2 audio signal
AES/EBU: Signal input to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
i.LINK: i.LINK signal