Philips sonicare AirFloss Pro Mode D'emploi page 7

Your Sonicare AirFloss Pro (Fig. 1)
1 Nozzle tip
2 AirFloss Pro nozzle
3 Activation button
4 Reservoir and reservoir cover
5 Handle
6 Charge & burst mode indicators
- Single burst: 1 LED
- Double burst: 2 LEDs
- Triple burst: 3 LEDs
7 Power/mode button
8 Removable nozzle holder (select models)
9 Charger
Note: The contents of the box may vary based on the
model purchased.
Charging
Charge AirFloss Pro for 24 hours before first use.
1 Put the plug of the charger in the electrical outlet.
2 Place the handle on the charger.
, Charging process:
- 1 green LED: 33% charged.
- 2 green LEDs: 66% charged.
- 3 green LEDS: 100% charged.
Note: When it is fully charged, AirFloss Pro has an
operating time of up to 11 days when it is used in
triple burst mode, and up to 33 days when it is used in
single burst mode.
Note: When the charge indicators flash yellow, the
battery is low and needs to be recharged
(fewer than 3 uses left).
ENGLISH
7