Philips sonicare AirFloss Pro Mode D'emploi page 11

Automatic shut-off function
The AirFloss Pro automatically turns off if it has not
been used for one minute.
Cleaning
If the AirFloss Pro becomes clogged, or to clean
the inside of the AirFloss Pro, fill the reservoir with
warm water and press the activation button until the
reservoir is empty.
Do not clean the nozzle, handle or charger in the
dishwasher.
Do not use cleaning agents to clean the product.
The formulation or strength of some agents may
damage the product.
Handle and nozzle
1 Remove the AirFloss Pro nozzle from the
handle. Rinse the nozzle after each use to
eliminate the residue left in it.
2 Open the reservoir and rinse it under a faucet
to eliminate residue.
Tip: You can also use a cotton swab to wipe the
reservoir and remove the remaining residue.
Note: Do not immerse the handle in water.
Note: Failure to remove residue from the nozzle or
reservoir may result in an unhygienic condition.
ENGLISH
11