Conditions Of Use - Festo EGSA Notice D'utilisation

EGSA
4

Conditions of use

Warning
Uncontrolled moving masses can cause
injury to people or damage to property
(danger of fingers being squashed).
S Apply power to the drive motor, at first
limited to low speeds and torques.
Make sure that the following specifications are observed:
Compare the maximum values specified in these operating instructions with
S
those of your actual application (e. g. forces, torques, temperatures, masses,
speeds).
Operation of the product in compliance with the relevant safety regulations is
contingent on adherence to the load limits.
Take into consideration the ambient conditions at the location of use.
S
Corrosive elements in the environment (e. g. ozone) will reduce the service life
of the EGSA.
Please comply with national and local safety laws and regulations.
S
Remove transport packaging such as foils (polyethylene) and cardboard.
S
The packing is intended for recycling (except for: oiled paper = other waste).
Use the EGSA in its original state without undertaking any modifications.
S
Use the EGSA only in conjunction with a separately switched emergency stop
S
mechanism (è chapter 5 Electric circuit installation").
Take the tolerance of the tightening torques into consideration. Without
S
special specification the tolerance is ±20 %.
22
Fig. 2
Festo EGSA 0711NH English