Parameters Set-Up; To Choose The Auto. Off Time - Giropes BAXTRAN BAP Manuel D'utilisation

6. Water's density in different temperature

5. PARAMETERS SET-UP

The parameter set-up menus allow the balance to be set as required by the
user.
Press the
the display will enter into parameter setting mode.

5.1 TO CHOOSE THE AUTO. OFF TIME

The display show as below:
A. off
Press or
key to enter into current setting.
Press the
no (Disabled to auto. off). (Default: no)
and key at the same time, and hold for 2 seconds, then
key to move to last setting or next setting; or press
or key to choose the Auto. off time from 2m, 5m, 8m or
USER MANUAL BAP EN EN
13