Density Calculation Mode (Optional) - Giropes BAXTRAN BAP Manuel D'utilisation

Then the sampling operation is finished. The balance can used for percent
weighing.
Press
it returns to weighing mode will bring back to percent weighing mode and the
unit weight data is still stored for use).
Note:
1.If a container needs to be used, press
counting mode.
2. If the unit weight is too small (less than 0.2 of a scale division), the display will show: --or-- PCS.
3.The memory of sampling size data will be cleared automatically every time the
used to select parts counting or percent weighing.

4.5 DENSITY CALCULATION MODE (Optional)

The balance can calculate sample's density through measuring sample weight in air, weight in water and
water's density in current temperature
PROCEDURE
Press the
calculation mode. Then the display shows a temperature value.
The balance can be equipped with an optional hanging hook which can be
used in Density Calculation mode.
1. Open the rubber seal on the bottom of the balance.
10
key to return to normal weighing mode. (Pressing
key 3 times in normal weighing mode to switch to density
key to subtract its weight before entering into the
Rubber Seal
Hole for hanging hook
USER MANUAL BAP
key after
key is
EN EN