Giropes BAXTRAN BAP Manuel D'utilisation page 11

2. Install the hanging hook.
A. CHOOSE WATER'S TEMPERATURE.
Use the thermometer to test water's temperature in current situation. Use
or key to choose the corresponding temperature value. Press
ENTER key to confirm.
B. Then the display shows the water's density under the temperature you have
chosen. And press
For example: 0.99705r-L
r-L: Indicate water density
C. SAMPLE WEIGHT IN AIR
Then the display shows "0.00g in-A" . Hang the sample on the hook (If a con-
tainer is used, press
display will show the sample's weight in air.
In-A: Indicate weight in air
The display shows as below
Press key to confirm
NO INCLUDED
(The default value: 25 Cº)
key to confirm.
key to subtract the container's weight first), the
USER MANUAL BAP EN EN
11