Pelletbox Cleaning Instruction - GEO plast GEObox Speed 12 Manuel

6. PELLETBOX CLEANING INSTRUCTION

The pelletbox should be cleaned every 3 – 5 years, depending on the quality of the pellets.
E
(THIS ALSO APPLIES TO ALL UPSTREAM AND DOWNSTREAM COMPONENTS, SUCH AS PELLET BOILERS)!
N
1. The box should be emptied completely.
G
2. Remove dust from the walls of the fabric (tap the fabric from outside).
3. Unscrew the mounting consoles, which affix the fabric to the cone parts.
L
4. Now you can lift the tube and you have an access to the inside of the box.
5. Repeat this process on an adjacent side once again, to get more place. (see sketch)
I
6. Now the pellet dust can be removed or sucked off with the help of a traditional vacuum cleaner.
S
H
THE BAG OF THE STORAGE SYSTEM HAS TO BE EXAMINED FOR WEAROUT AT REGULAR INTERVALS OF 3
YEARS (THE ROOF OF THE BAG AND THE IMPACT PROTECTION PAD IN PARTICULAR), SINCE IT IS EXPOSED
20
SHUT OFF THE CURRENT OF THE WHOLE INSTALLATION
mounting console
RESTORE ORIGINAL CONDITION AND RETIGHTEN ALL THE SCREWS.
TO WEAR AND TEAR THROUGH FILLING.